LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2006 >> Durango 4.7 P, 4WD, Part Time >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System & Automatic Transmission Cooling System >> Engine >> Sensor-Engine Coolant Temperature >> Installation >> 3.7L Engine
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

3.7L Engine

Fig 1: MAP Sensor/ECT Sensor - 3.7L
GC0010121Courtesy of DAIMLERCHRYSLER CORP.
  1. Apply thread sealant to sensor threads.
  2. Install engine coolant sensor into intake manifold. Tighten sensor to 11 N.m (97 in. lbs.) torque.
  3. Connect the electrical connector.
  4. Fill the cooling system (Refer to COOLING - STANDARD PROCEDURE) .
scientia non olet · About LEMON Manuals