Torque Specifications

Crankshaft Pulley 175 Nm (130 Ft.Lbs.)

CRANKSHAFT MAIN BEARING CAPS





Hand tighten bolts 1D,1G and 1F until the bedplate contacts the block.
- Tighten bolts 1A - 1J to 54 Nm (40 ft. lbs.)
- Tighten bolts 1 - 8 to 7 Nm (5 ft. lbs.)
- Turn bolts 1 - 8 an additional 90°.
- Tighten bolts A - E 27 Nm ( 20 ft. lbs.).