PLUG, Glow: Installation: Installation
- Clean glow plug bay and install glow plug.
- Tighten glow plugs to 10 N.m (89 lbs. in.).
- Connect glow plug electrical connector.
- Install cylinder head cover.
- For 1.8L engine, refer to INSTALLATION .
- For 2.0L engine (Gas), refer to INSTALLATION .
- For 2.4L engine, refer to INSTALLATION .
- Install engine cover.
- For 1.8L engine, refer to INSTALLATION .
- For 2.0L engine (Gas), refer to INSTALLATION .
- For 2.4L engine, refer to INSTALLATION .
- Connect negative battery cable.