October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Gas Engine
Courtesy of CHRYSLER GROUP, LLC
| 1 - WATER PUMP |
| 2 - MOUNTING BOLT |
| 3 - WATER INLET TUBE NUTS |
| 4 - INLET WATER TUBE |
- Position the water pump assembly (1) and gasket onto the cylinder block.
- Position the water inlet tube (4) and gasket onto the water pump (1).
- Install the mounting bolts (2). Tighten the bolts to 24 N.m (18 ft. lbs.).
- Install the drive belt splash shield.
- Lower the vehicle.
- Install the accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION .
- Evacuate air and refill cooling system. Refer to STANDARD PROCEDURE .
- Check cooling system for leaks. Refer to DIAGNOSIS AND TESTING .