LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2012 >> Caliber SXT >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Module, Glow Plug [ENE] >> Installation >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Module, Glow Plug [ENE]: Installation: Installation

Fig 1: Identifying Glow Plug Module & Bolts
GC0138478Courtesy of CHRYSLER GROUP, LLC
  1. Install the glow plug module (1). Tighten bolt to 9 N.m (80 in. lbs.).
    Fig 2: Identifying Glow Plug Harness Connector, Glow Plug Module & Power Supply Harness Connector
    GC0138477Courtesy of CHRYSLER GROUP, LLC
  2. Connect the power supply harness connector (3) to the glow plug module (2).
  3. Connect the glow plug harness connector (1).
  4. Connect the fuel lines.
  5. Install the air cleaner assembly. Refer to BODY, AIR CLEANER, INSTALLATION .
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals