General Specifications
WARNING: This page is about a different variant/trim than selected.
| DESCRIPTION | SPECIFICATION |
|---|---|
| Axle Ratio | 3.07 |
| Ring Gear Diameter | 175 mm (6.9 in.) |
| Ring Gear Backlash | 0.05-0.11 mm (0.002-0.004 in.) |
| Differential Torque-to-Rotate | 190-260 N.cm (17-23 in. lbs.) |
| Pinion Housing Torque-to-Rotate | 130-260 N.cm (12-23 in. lbs.) |
| Pinion Depth Shim Size | 1.15-2.11mm (0.045-0.083 in.) Available in 0.04 mm (0.0015 in.) increments |
| Pinion Bearing Preload Spacer Size | 9.60-10.59mm (0.378-0.417 in.) Available in 0.03 mm (0.001 in.) increments |
| Differential Bearing Preload Shim Size | 1.31-2.51 mm (0.051-0.099 in.) Available in 0.04 mm (0.0015 in.) increments |
| Differential Backlash Shim Size | 1.34-2.98 mm (0.053-0.117 in.) Available in 0.04 mm (0.0015 in.) increments |