LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2020 >> Durango SRT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Active Damping Control (ADCM) >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Module, Active Damping Control (ADCM): Installation

GC0145747Courtesy of CHRYSLER GROUP, LLC
  1. Connect the Active Damping Control Module (ADCM) wiring harness connectors.
  2. Slide the ADCM (2) into position, making sure the ADCM securely latches into place.
  3. From behind/under the left front seat, install the cover panel on the electronic module tub (4).
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  5. Perform the ADCM Verification Test.
scientia non olet · About LEMON Manuals