October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Module, Wireless Charging Pad: Installation
 Courtesy of CHRYSLER GROUP, LLC
|
- Position the wireless charging pad module (2) to the bottom side of the wireless charging pad bracket (3).
- Install the fasteners (1) and tighten securely.
 Courtesy of CHRYSLER GROUP, LLC
|
- Position the wireless charging pad bracket (2) to the floor console (3) and connect the wire harness connector.
- Install the wireless charging pad bracket (2) into the floor console (3). Verify the retaining clips are fully engaged.
- Install the fasteners (1) and tighten securely.
- Install the Shifter Bezel. Refer to BEZEL, SHIFTER, INSTALLATION
.
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.