Section 18 (Steering System): Column: Installation

WARNING: This page is about a different car, the 2022 RAM ProMaster 3500, 2022 RAM ProMaster 2500, and 2022 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of CHRYSLER GROUP, LLC

Position the steering column to the instrument panel.
Install the steering column bolts (1) and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS .

Courtesy of CHRYSLER GROUP, LLC
Install the steering column nuts (1) and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS .
Secure the wiring harness routing clip (2).

Courtesy of CHRYSLER GROUP, LLC
Install the steering column shaft to the steering gear.
Install the steering column pinch bolt (1) and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS .
Install the clockspring. Refer to CLOCKSPRING, INSTALLATION .
Install the upper steering column shroud. Refer to SHROUD, STEERING COLUMN, UPPER, INSTALLATION .
Install the lower steering column shroud. Refer to SHROUD, STEERING COLUMN, UPPER, INSTALLATION .
Install the steering wheel. Refer to WHEEL, STEERING, INSTALLATION .