LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1990 >> Premier ES >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Manifold Air/Fuel Temperature (Mat) Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

The MAT sensor is installed in throttle body adapter, at rear of intake manifold. Disconnect wire harness connector from MAT sensor. Remove MAT sensor from adapter. To install, reverse removal procedure. Tighten MAT sensor bolts to 21 ft. lbs. (28 N.m).

scientia non olet · About LEMON Manuals