Bleeding Brake System: Notes

NOTE: During bleeding procedure, ensure fluid level remains close to full. Check fluid level periodically while bleeding system. Add DOT 3 brake fluid as required.

Teves-Mark IV ABS system must be bled as 2 independent braking systems. Always bleed base brake system using manual bleeding or pressure bleeding procedure before bleeding the Hydraulic Control Unit (HCU). Refer to the appropriate MANUAL BLEEDING procedures or PRESSURE BLEEDING procedures. The HCU must be bled separately. Refer to BLEEDING HYDRAULIC CONTROL UNIT . Bleeding HCU requires Diagnostic Readout Box II (DRB-II). Always repeat base system bleeding procedure after bleeding HCU.