October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Pull-In Coil Test
- Disconnect field coil wire from terminal "M" at starter solenoid. See Fig 1. Connect jumper wire between positive battery terminal and terminal "S" of solenoid.
- Connect a second jumper wire from negative battery terminal and touch terminal "M" of starter solenoid. See Fig 1. If solenoid plunger moves inward, solenoid is good. If solenoid plunger does not move inward, replace solenoid.
Courtesy of CHRYSLER CORP.