LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Eagle >> 1996 >> Vision TSi >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Engine Control System & Engine Component Tests) >> Ignition System >> Coil Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Coil Test

WARNING: This page is about a different car, the 1996 Chrysler New Yorker and 1996 Chrysler LHS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Disconnect ignition coil electrical connections. Using a DVOM, measure resistance of primary and secondary coil circuits. Measure primary circuit resistance between battery terminal and terminal for cylinders being checked. See Fig 1 .
  2. Measure secondary circuit resistance across coil towers. See Fig 1 . See IGNITION COIL RESISTANCE  table. If resistance is within specification, ignition coil is okay. If resistance is not within specification, replace ignition coil.
IGNITION COIL RESISTANCE - Ohms @ 70-80°F (21-27°C)

Application Primary Secondary
LHS & New Yorker .45-.65 7000-15,800
Fig 1: Identifying Ignition Coil Primary & Secondary Circuits
G95E13643Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals