LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2012 >> 500 Pop, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Vehicle Tracking Module - Electrical Diagnostics >> Diagnosis And Testing >> B1006-4A-Sim Failure - Incorrect Component Installed >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

  1. CHECK FOR AN INTERMITTENT CONDITION 
    1. With the scan tool, erase the VTM DTCs.
    2. Cycle the ignition switch from on to off, wait five seconds and then back to on.
    3. With the scan tool, read the VTM DTCs.

      Does the scan tool display: B1006-4A-SIM FAILURE - INCORRECT COMPONENT INSTALLED as active?

      Yes 

      • Remove the Vehicle Tracking Module in accordance with the Service Information. Refer to MODULE, VEHICLE TRACKING, REMOVAL .
      • Remove the internal battery from the VTM to access the SIM card. If the SIM card is missing or incorrect contact the Vehicle Tracking Service Provider.
      • Refer to STANDARD PROCEDURE and perform the BODY VERIFICATION TEST.

      No 

      • Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals and correct pin tension.
      • Refer to STANDARD PROCEDURE and perform the BODY VERIFICATION TEST.
scientia non olet · About LEMON Manuals