Possible Causes
- When Monitored
Ignition on, engine running.
System voltage is greater than 10.5 volts.
No solenoid short to voltage DTCs set.
- Set Condition:
C1 Pressure Control Linear solenoid current is less than 0.02 of an amp for more than 0.1 of a second for five consecutive tests.
| Possible Causes |
|---|
| INTERNAL TRANSMISSION HARNESS |
| C1 PRESSURE CONTROL LINEAR SOLENOID |
| TRANSMISSION CONTROL MODULE (TCM) |
Always perform the AW60T Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to STANDARD PROCEDURE .