Diagnostic Test

CHECK VOLUMETRIC SENSOR OPERATION
1. Check Volumetric Sensor operation.
  Is the Volumetric Sensor working?
  
  Yes
  - Go to 2.
  No
  - Replace the Volumetric Sensor in accordance with the Service Information.
  - Go to 2.
CHECK THAT THE BODY COMPUTER MODULE IS WORKING PROPERLY
1. Connect the Scan Tool and carry out the Body Computer Module DTC deletion procedure.
2. Lock the door to activate the Anti-Theft Stand-By Mode.
3. Unlock the door to deactivate the Anti-Theft Stand-By Mode.
4. Wait at least 1.5 seconds.
5. Check whether the DTC is still present.
  Is the DTC still present?
  
  Yes
  - Replace the Body Computer Module in accordance with the Service Information.
  No
  - End of diagnosis.