Diagnostic Test

RESET THE DATA CONFIGURATION FROM THE INSTRUMENT PANEL MODULE TO THE BODY COMPUTER MODULE
1. Connect the Scan Tool to the Instrument Panel Module and check whether the Vehicle Configuration Resetting Procedure has been carried out.
2. Carry out the Body Computer Module DTC deletion procedure.
3. Wait at least 30 seconds.
4. Check whether the DTC is still present.
  Is the DTC still present?
  
  Yes
  - Carry out the Vehicle Configuration Resetting Procedure again.
  - Go To 2.
  No
  - End of diagnosis.
CHECK THAT THE BODY COMPUTER MODULE IS WORKING PROPERLY
1. Connect the Scan Tool and carry out the Body Computer Module DTC deletion procedure.
2. Wait at least 30 seconds.
3. Check whether the DTC is still present.
  Is the DTC still present?
  
  Yes
  - Replace the Body Computer Module in accordance with the Service Information.
  No
  - End of diagnosis.