Diagnostic Test

CHECK FOR PRESENCE OF ERRORS IN THE ENTIRE SYSTEM
1. Connect the diagnosis equipment and perform Blind Spot Module erase DTC procedure.
2. at least 31.5 seconds.
  Are there any other Modules in addition to Blind Spot Module, left side, viewing the U2300-55 DTC?
  
  Yes
  - Perform the vehicle configuration resetting procedure, then go to Step 2.
  No
  - Go to Step 3.
CHECK THAT THE INSTRUMENT PANEL IS WORKING CORRECTLY
1. Perform the Blind Spot Module erase DTC procedure.
2. at least 31.5 seconds.
  Are there any other Modules in addition to Blind Spot Module, left side, viewing the U2300-55 DTC?
  
  Yes
  - Replace the Instrument Panel Module, then go to Step 3.
  No
  - Go to Step 3.
CHECK CORRECT OPERATION OF THE BLIND SPOT MODULE
1. Perform the Blind Spot Module erase DTC procedure.
2. at least 31.5 seconds.
3. Check whether the DTC is still present.
  Is the DTC still present?
  
  Yes
  - Replace the Blind Spot Module, left side.
  No
  - End of diagnosis.