BCM Access Panel

REMOVAL 

1. Disconnect and isolate the negative battery cable.
2. Remove the front door sill plate. Refer to PLATE, SCUFF, DOOR, REMOVAL AND INSTALLATION .
3. Remove the transmission shift lever handle. For automatic Refer to SHIFTER, TRANSMISSION, REMOVAL AND INSTALLATION , For manual Refer to KNOB, GEARSHIFT, REMOVAL AND INSTALLATION .
4. Remove the steering column opening cover. (Refer to COVER, INSTRUMENT PANEL ).
5. Remove the HVAC duct. Refer to DUCT, INSTRUMENT PANEL, CENTER, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

6. Reposition that passenger compartment mat (1a) to gain access to the Body Control Module (BCM) access cover.

   Courtesy of CHRYSLER GROUP, LLC

7. Remove the hood opening lever cable (1a) and remove the nuts (1b).
8. Remove the BCM access cover.

INSTALLATION 

1. Position the BCM access cover in its housing and tighten the nuts.
2. Connect the hood lever cable to its housing.
3. Install the HVAC duct. Refer to INSTALLATION .
4. Install the steering column opening cover. (Refer to COVER, INSTRUMENT PANEL ).
5. Install the transmission shift lever handle. For automatic Refer to SHIFTER, TRANSMISSION, REMOVAL AND INSTALLATION , For manual Refer to KNOB, GEARSHIFT, REMOVAL AND INSTALLATION .
6. Install the front door sill plate. Refer to PLATE, SCUFF, DOOR, REMOVAL AND INSTALLATION .
7. Connect the negative battery cable.