Diagnostic Test

CHECK PERSISTENCE OF THE INSTRUMENT PANEL MODULE DTC
1. Connect the Scan Tool and carry out the Adaptive Headlight Module DTC cancellation procedure.
2. Go to the Key-ON (engine off or on) condition and wait at least 5 seconds.
3. Check if the DTC is still present.
  Is the DTC still present?
  
  Yes
  - Replace the Instrument Panel Module in accordance with the Service Information.
  - Go To 2.
  No
  - Go To 2.
CHECK CORRECT OPERATION OF THE ADAPTIVE HEADLIGHT MODULE
1. Connect the Scan Tool and carry out the Adaptive Headlight Module DTC cancellation procedure.
2. Go to the Key-ON (engine off or on) condition and wait at least 5 seconds.
3. Check if the DTC is still present.
  Is the DTC still present?
  
  Yes
  - Replace the Adaptive Headlight Module in accordance with the Service Information.
  No
  - End of diagnosis.