Diagnostic Test

RESET THE INSTRUMENT PANEL MODULE DATA CONFIGURATION
1. Connect the Scan Tool to the Instrument Panel Module and check if the Vehicle Configuration Resetting Procedure has been carried out.
2. Carry out the Adaptive Headlight Module DTC cancellation procedure.
3. Go to the Key-ON condition and wait at least 30 seconds.
4. Check if the DTC is still present.
  Is the DTC still present?
  
  Yes
  - Carry out the Vehicle Configuration Reset Procedure again.
  - Go to 2.
  No
  - End of diagnosis.
CHECK CORRECT OPERATION OF THE ADAPTIVE HEADLIGHT MODULE
1. Connect the Scan Tool and carry out the Adaptive Headlight Module DTC cancellation procedure.
2. Go to the Key-ON (engine off or on) condition and wait at least 30 seconds.
3. Check if the DTC is still present.
  Is the DTC still present?
  
  Yes
  - Replace the Adaptive Headlight Module in accordance with the Service Information.
  No
  - End of diagnosis.