Diagnostic Test

PERFORM THE RESTORE PROCEDURE FOR AIRBAG MODULE CONFIGURATION
1. Connect the diagnosis equipment to the Airbag Module and check whether the vehicle configuration resetting procedure has been carried out.
2. Perform the Airbag Module error deletion procedure.
3. Check whether the error is still present.
  Is the error still present?
  
  Yes
  - Go to Step 2.
  No
  - End of diagnosis.
CHECK CORRECT INSTALLATION OF AIRBAG
1. Ensure that the Airbag, passenger side, is correctly installed.
  Is the Airbag, passenger side, correctly installed?
  
  Yes
  - Go to Step 3.
  No
  - Perform the correct installation of Occupant Classification system (OCS) control unit.
  - Go to Step 3.
CHECK CORRECT FUNCTIONING OF THE AIR-BAG MODULE
1. Perform the Airbag Module error deletion procedure.
2. Check if the error is still present.
  Is the error still present?
  
  Yes
  - Replace the Airbag Module if the error occurs again. Refer to MODULE, OCCUPANT RESTRAINT (ORC), REMOVAL AND INSTALLATION .
  No
  - End of diagnosis.