Diagnostic Test
- CHECK CORRECT INSTALLATION OF SIDE IMPACT SENSOR, PASSENGER SIDE, ON STRUT
- Go to Key-OFF status.
- at least 1 minute.
- Ensure that the side impact sensor, passenger side, on strut is correctly installed.
Is the side impact sensor, passenger side, on strut correctly installed?
Yes
- Go to Step 2.
No
- Correctly install the side impact sensor, passenger side, on strut, then go to Step 2.
- CHECK FOR THE ERROR PERSISTENCE ON THE SIDE IMPACT SENSOR, PASSENGER SIDE, ON STRUT
- Connect the negative battery lead.
- Go to key-on condition (engine off or on).
- Perform the Airbag Module error deletion procedure.
- Check if the error is still present.
Is the error still present?
Yes
- Replace the side impact sensor, passenger side, on strut.
No
- End of diagnosis.