LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1989 >> Cutaway 7.3 M >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Diesel >> Adjustments >> Injection Pump Static Timing
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Injection Pump Static Timing

  1. Remove fast idle bracket and solenoid from injection pump. Loosen 3 nuts attaching fuel injection pump to pump mounting adapter with Injection Pump Wrench (T86T-9000-C).
  2. Install Injection Pump Rotator (T83T-9000-C) on front of pump. Rotate pump to align injection pump mounting flange timing mark with pump mounting adapter timing mark. See Fig 1 .
  3. Remove rotator and tighten mounting nuts. Visually check timing to ensure marks are still aligned after tightening nuts. Install fast idle bracket and solenoid.
    Fig 1: 7.3L Static Timing Mark Alignment
    G72711Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals