October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test 7, Fan Relay Function Check

Remove cooling fan relay No. 1. Using jumper wires, supply battery voltage to "A" terminal and ground terminal "B" of relay No. 1. Using an ohmmeter, check resistance between terminals "C" and "D". If resistance is more than 10,000 ohms with voltage applied, and less than 5 ohms with voltage disconnected, go to TEST 8 . If resistance is not correct, replace relay No. 1.