October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

EGR Vent Solenoid Valve

Disconnect vacuum hoses and solenoid valve connection. Blow through vent hose "B" and verify that air flows. Apply 12 volts and ground the connector. See Fig 1 . Blow through the vent hose and ensure air does not flow. Replace EGR control solenoid valve if necessary.

Fig 1: Testing EGR Vent Solenoid Valve

Courtesy of FORD MOTOR CO.