Programmable Seat Control Switch Test
- With "1" button pressed, continuity should be present between terminals No. 1 and No. 2. With "2" button pressed, continuity should be present between terminals No. 1 and No. 3. With "SET" button pressed, continuity should be present between terminals No. 1 and No. 4.
- To test the LED in "SET" switch, ground terminal No. 5 and connect terminal No. 6 to battery positive. The LED should glow. Refer to the PROGRAMMABLE SEAT SWITCH CONNECTOR FUNCTION table. Also, See Fig 1 .
PROGRAMMABLE SEAT SWITCH CONNECTOR FUNCTION
| Pin No. | Wire Color | Function |
|---|---|---|
| 1 | PPL/WHT | LED Drive |
| 2 | BRN/LT. GRN | LED Return |
| 3 | BLK/ORN | Set Button |
| 4 | BRN/ORN | Pos. 2 Button |
| 5 | LT. GRN/WHT | Pos. 1 Button |
| 6 | WHT/ORG | Common |