October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

EGR Solenoid

Remove EGR solenoid harness connector. Measure resistance across EGR solenoid terminals with DVOM. Resistance should be 65-110 ohms. Set DVOM to 200k-ohm scale. Measure resistance between each solenoid terminal and ground or side of solenoid. Resistance should be greater than 10 k/ohms. If resistance is not as specified in either test, replace EGR solenoid.