October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Fuel Pump: Installation
- Clean fuel pump mounting flange, fuel tank mounting surface and seal ring groove. to hold new seal ring in place during installation, apply a light coating of Long Life Lubricant (C1AZ-19590-BA) on seal ring.
- Install seal ring in fuel ring groove. Install fuel pump and sender assembly taking care not to damage nylon filter. Ensure locating keys are in keyways and seal ring remains in place.
- Tighten locking ring by rotating ring clockwise using Fuel Tank Sender Wrench (D84P-9257-A) until ring stops against stops. To complete installation, reverse removal procedure.