October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Continuity Check
- Ensure ABS fail-safe relay is disconnected. Verify ignition is off.
- Set VOM on 20 k/ohm scale. Check resistance at ABS fail-safe relay between terminal "b" and terminal "c". Resistance should be greater than 10,000 ohms.
- Set VOM on 200 ohm scale. Check resistance at ABS fail-safe relay between terminal "b" and terminal "f". Resistance should be less than 5 ohms.
- If resistances are as specified, go to PINPOINT TEST FSR-8
. If resistances are not as specified, replace ABS fail-safe relay.