October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Control Module Connector Resistance Check
- Ensure ignition is off. Verify ABS control module connector is disconnected. Set VOM on 2 k/ohms scale. Measure and record resistance between each of following connector wire terminals:
- White and Red wires (Left Front Wheel Speed Sensor).
- Yellow and Orange wires (Right Front Wheel Speed Sensor).
- Yellow/Green and Yellow/Black wires (Left Rear Wheel Speed Sensor).
- Green and Black wires (Right Rear Wheel Speed Sensor).
- If ALL resistances are between 800-1200 ohms, go to PINPOINT TEST WSS-5
. If any resistance measurement is not within specification, go to PINPOINT TEST WSS-4
.