October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
TFI-IV Closed Bowl Stator Check
- Separate wiring harness connector from distributor. Measure resistance between stator connector terminals No. 1 and 5. Resistance between terminals No. 1 and 5 should be less than 5 ohms. See Fig 1
.
- Measure resistance between stator connector terminal No. 2 and ground. Measure resistance between stator connector terminal No. 6 and ground. Resistance should be less than one ohm in both cases.
Courtesy of FORD MOTOR CO.