October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test 35, Check For IDM Short In ECA

With key off and ECA disconnected, set DVOM to 20-volt scale. Crank engine, and measure voltage between breakout box pins No. J30 (EDIS diagnostic cable IDM detector) and J7 (BAT -). If voltage is 4.5-6.0 volts, replace ECA. Remove all test equipment, and reconnect all components. Clear Continuous Memory, and check for fault codes. If voltage is not 4.5-6.0 volts, go to next test.