LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Explorer 2D Utility, 4WD, Standard >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Adjustments >> Front Window Mechanism (Explorer & Ranger)
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Front Window Mechanism (Explorer & Ranger)

  1. Remove door trim panel and watershield. See DOOR TRIM PANEL  in REMOVAL & INSTALLATION.
  2. Lower glass approximately 2-3 inches (51-76 mm) from full UP position.
  3. Loosen three guide assembly nut and washer assemblies.
  4. Push glass rearward, within the door glass run assembly, until it bottoms out within the door frame.
  5. Move window guide post rearward within retention slot in inner panel. Tighten three guide assembly nut and washer assemblies. See TORQUE SPECIFICATIONS  .
  6. Cycle glass up and down to check position.
  7. Install watershield and trim panel. See DOOR TRIM PANEL  in REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals