LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Explorer 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Tests >> Power Window Motor
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Power Window Motor

NOTE: To test the current draw of a power window motor, remove the door trim panel. See DOOR TRIM PANEL  in REMOVAL & INSTALLATION.
  1. Disconnect the motor lead.
  2. Disconnect the regulator mechanism from the motor.
  3. Supply power to motor lead connector with an ammeter in series.
  4. Operate the motor and observe the current draw. The current draw for the no-load test should not exceed four amps and should not fluctuate. Reversal of the motor wire connections will reverse the direction of motor rotation. Replace the motor if the current draw exceeds four amps.
scientia non olet · About LEMON Manuals