October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Single Switch
- Use a self-powered test lamp or an ohmmeter to test the power window switch.
- With the switch in the neutral position, there should be continuity between terminals No. 1 and 3, 2 and 5, and 4 and 6. See Fig 1
. See WIRING DIAGRAMS
.
- With the toggle switch pushed downward, there should be continuity between terminals No. 2, 4 and 5, and 1 and 3. Terminal No. 6 should be disconnected from any other terminal.. See Fig 1
. See WIRING DIAGRAMS
.
- With the toggle switch pushed upward, there should be continuity between terminals No. 2, 3 and 5, and 4 and 6. Terminal No. 1 should be disconnected from any other terminal.. See Fig 1
. See WIRING DIAGRAMS
.
- If the switch does not test as stated, replace the switch.
Courtesy of FORD MOTOR CO.