October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Ignition Switch Test
- Locate ignition switch connector under dash. Using a 12-volt test light or voltmeter, ensure voltage is present on Black/Yellow wire (Capri) or Black/Red wire (Festiva) when ignition switch is turned to RUN or ON position. This will verify proper operation of ignition switch.
NOTE:
DO NOT disconnect ignition switch connector during this test.
- If there is no voltage at this wire, the problem is either ignition switch, circuit between battery and ignition switch, or 25-amp MAIN fusible link (Festiva).