October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Resistance Check

Turn ignition off. Disconnect ABS fail-safe relay. Set VOM on 200 ohm scale. Measure resistance at ABS fail-safe relay between terminal "d" (Black/Blue wire) and terminal "e" (Black/Green wire). See Fig 1 .
If resistance is 60-100 ohms, go to PINPOINT TEST FSR-7 . If resistance is not as specified, replace ABS fail-safe relay.

Fig 1: Identifying ABS Fail-Safe Relay Terminals