LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Standard >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering System - Variable Assist >> Pinpoint Tests >> Pinpoint Test D4 >> Vehicle Speed Sensor Function Check
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Vehicle Speed Sensor Function Check

For analog display dash only. Turn ignition off. Remove instrument cluster. See VEHICLE SPEED SENSOR  under REMOVAL & INSTALLATION. Disconnect speedometer cable from instrument cluster. Connect ohmmeter between Green/Red wire and Black wire of instrument cluster connector. Rotate speedometer cable connector on instrument cluster. If there are 4 continuity interruptions per speedometer cable rotation, proceed to PINPOINT TEST D5  . If there are NOT 4 continuity interruptions, replace speedometer subassembly.

NOTE: The vehicle speed sensor is part of the speedometer subassembly on vehicles with analog display dash. The speedometer subassembly must be replaced when vehicle speed sensor is defective.
scientia non olet · About LEMON Manuals