LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Standard >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering System - Variable Assist >> Testing >> Key On, Engine Running Test >> Test Results
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test Results

Begin with STEP "A" in left column, following instructions in test step column. See Fig 1 . Record test results. Continue testing with STEP "B". Record test results. Ignore codes retrieved with engine NOT running. Go to PINPOINT TEST indicated in ACTION TO TAKE column. A pass code in ACTION TO TAKE column indicates no faults detected. Proceed to CONTINUOUS MONITOR TEST  .

NOTE: If a constant 12 volts is indicated by VOM, a shorted circuit to VAPS control module may exist. Diagnose test connector circuit indicated in PINPOINT TEST Q1  -PINPOINT TEST Q7  to continue. Repair test connector circuit. Repeat KEY ON, ENGINE RUNNING TEST  and proceed with other tests before replacing control module.
Fig 1: Key On, Engine Running Test
G107103Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals