LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Explorer 2D Utility, RWD, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Testing >> Power Window Switch >> Aerostar (Multiple Switch)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Aerostar (Multiple Switch)

Testing of the power window multiple switch should be performed with the switch removed from the vehicle. Use a self-powered test lamp or an ohmmeter such as Rotunda Digital Volt-Ohmmeter (007-00001), or equivalent.

  1. Clip one test lead probe on terminal No. 6 which is grounded. With both switches in the neutral position, terminals No. 1 through 4 should have continuity to terminal No. 6.See Fig 1 .
  2. Push both window switches upward (toward window when in installed position). Both terminals No. 1 and 3 should have no continuity to terminal No. 6. Push both window switches downward (away from window when in installed position). Both terminals No. 2 and 4 should have no continuity to terminal No. 6.
  3. Remove the test lead from terminal No. 6 and connect to terminal No. 5 (hot feed terminal). With both switches in the neutral position, terminal No. 5 should have continuity only with itself. Push both window switches upward (toward the window when in installed position). Both terminals No. 1 and 3 should have continuity to terminal No. 5.
  4. Push both window switches downward (away from the window when in installed position). Both terminals No. 2 and 4 should have continuity to terminal No. 5. If any one switch does not test as stated, replace the complete switch assembly. See WINDOW SWITCH  under REMOVAL & INSTALLATION.
Fig 1: Testing Power Window Switch (Multiple Switch, Aerostar)
G00088814Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals