Blower Motor Current Draw Test
WARNING: This page is about a different car, the 1995 Ford RV Cutaway, 1995 Ford Econoline, 1995 Ford Cutaway, and 1995 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure battery is fully charged. Disconnect blower motor Black (ground) wire at blower motor resistor, located right of blower motor on evaporator housing. Connect ammeter leads between ground wire and resistor terminal.
- Place temperature selector lever in middle position and function selector lever in FLOOR position. Turn ignition on. Check blower motor amperage draw at fan switch positions indicated in BLOWER MOTOR TEST SPECIFICATIONS table.