Blower Motor Current Draw Test
WARNING: This page is about a different car, the 1995 Ford RV Cutaway, 1995 Ford Econoline, 1995 Ford Cutaway, and 1995 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.
- Separate blower motor ground (Black) wire at blower motor resistor. Connect positive ammeter lead to female spade connector and negative ammeter lead to resistor terminal.
- Place temperature selector lever in midrange position and function selector lever in FLOOR position. Turn ignition on. Blower current draw (amperage) should be as specified. See BLOWER MOTOR TEST SPECIFICATIONS table under BLOWER MOTOR VOLTAGE TEST.