LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1996 >> Explorer 4D Utility, 5.0 P, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Abs Control Module >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect negative battery cable. ABS control module is located in engine compartment, on left front inner fender panel behind plastic fender liner. Disconnect 40-pin connector from ABS control module. Raise and support vehicle.
  2. Remove left front wheel. Remove left front fender apron. Remove mounting screws and remove ABS control module. To install, reverse removal procedure. Tighten screws to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals