LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1996 >> Probe Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Remove/Install/Overhaul - 2.0L) >> Fuel System >> Injectors >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different car, the 1995 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.

Remove fuel rail from intake manifold. See FUEL RAILS. Remove fuel injectors from fuel rail by rocking injectors while pulling injector from fuel rail. Lubricate new "O" rings with clean engine oil. Install new "O" rings on injectors. Inspect injector "plastic hat" (covering the injector pintle) and washer for deterioration. Replace as necessary.

scientia non olet · About LEMON Manuals