Power Seat Switch
Using ohmmeter, connect one lead to connector pin No. 4. Activate switch and connect remaining lead to connector pin No. specified. See POWER SEAT SWITCH CONTINUITY table. See Fig 1 and Fig 2 . Replace switch if it does not test as specified.
POWER SEAT SWITCH CONTINUITY
| Switch Position | Continuity Between Terminals No. |
|---|---|
| "A" (Up) | 1, 3, 5, 6 & 8 |
| "A" (Down) | 1, 3, 6, 7 & 8 |
| "B" (Right) | 1, 5, 6, 7 & 8 |
| "B" (Left) | 1, 3, 5, 6 & 7 |
| "C" (Up) | 1, 3, 5, 7, & 8 |
| "C" (Down) | 3, 5, 6, 7 & 8 |