October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Comprehensive Component Monitor Repair Verification Drive Cycle
- Refer to and complete the vehicle check and preparation before initiating the following repair verification steps. See VEHICLE CHECK/PREPARATION .
- Start the engine and go through the entire OBD-II drive cycle until the comprehensive component monitor shows the completion status by clearing the code P1000 on the scan tool.
- If the entire OBD-II drive cycle has been performed and the comprehensive component monitor check has not completed, Repeat quick test. See QUICK TEST .