Generic OBD-II PIDs

WARNING: This page is about a different car, the 1997 Ford Aspire. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to OFF position. Ensure test equipment is properly attached. Program scan tool using the following steps:

Select vehicle and engine selection menu (optional).
Select year, engine, model and any additional information requested by scan tool (optional).
Select GENERIC OBD-II OPTIONS. Press CONT button if monitors are not complete.
Select PID/DATA MONITOR.
Turn ignition on or start engine and allow to idle.
Follow operating instructions from scan tool menu.
Select PIDs and press START.