Power Window Single Switch
Remove suspect window switch. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Check for continuity between terminals as specified while operating switch. See appropriate SWITCH TESTING table. If continuity does not exist as specified, replace switch. See Fig 1 or Fig 2 .
RIGHT FRONT & RIGHT REAR SWITCH TESTING
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 3 & 7; 1 & 2; 5 & 6 |
| Up | 2 & 4; 5 & 6 |
| Down | 4 & 5; 1 & 2 |
LEFT REAR PASSENGER SWITCH TESTING
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Neutral | 3 & 7; 1 & 5; 2 & 6 |
| Up | 4 & 5; 2 & 6 |
| Down | 2 & 4; 1 & 5 |