System Specifications
| Front | Diameter | 10.9 Inch (in) | |
| Thickness: | Nominal | 1.03 Inch (in) | |
| Minimum Minimum safe thickness is also cast/stamped into each rotor. | 0.97 Inch (in) | ||
| Variation, Maximum | 0.0004 Inch (in) | ||
| Runout, Max On Vehicle: | Rotor | 0.001 Inch (in) | |
| Finish | 10-80 Inch (in) | ||
| Rear | Diameter | Inner | 7.1 Inch (in) |
| Outer | 10.47 Inch (in) | ||
| Thickness: | Nominal | 0.55 Inch (in) | |
| Minimum Minimum safe thickness is also cast/stamped into each rotor. | 0.5 Inch (in) | ||
| Variation, Maximum | 0.0003 Inch (in) | ||
| Runout, Max On Vehicle: | Rotor | 0.002 Inch (in) | |
| Finish | 16-25 Inch (in) |